Go to homepage
Go to homepage
|
€0.00

Our Solutions at a Glance

Get a quick overview of our product portfolio. The categories below take you directly to the relevant product areas. For a more specific selection, simply use the filter in the product overview afterwards.

DC

DC Power Supplies

Programmable DC sources for laboratory, development, and production applications.
↔

Bidirectional DC Sources

Source and load combined in one unit for battery simulation and energy storage applications.
AC

AC Power Supplies

Flexible AC sources for grid simulation and electrical testing.
⇄

Bidirectional AC Sources

Regenerative AC systems for grid simulation and energy feedback testing.
DL

Electronic DC Loads

Precise load simulation for power supplies, batteries, and DC systems.
AL

Electronic AC Loads

Realistic simulation of AC consumers and AC-based applications.
BS

Battery Simulators

High-precision cell and module simulation for BMS testing and development.
MT

Modular Test Systems

Scalable platforms for automated test benches and complex test setups.

Note: The tiles are intended for quick orientation. Detailed product selection is made using the filter in the product overview.

Produktübersicht

Filter products

83 Products found
LAB/HP

LAB/HP

For demanding DC test tasks in laboratories, production environments and integrated test systems.

  • High power DC source up to 63 kW single Unit
  • Output voltage freely configurable up to 2000 V
  • Master-slave expansion for high power

High Power DC Source
Details
N35500

N35500

Bidirectional DC Source 42 kW

  • 42 kW bidirectional DC source in just 3U
  • 100 / 360 / 500 / 750 / 1000 / 1500 / 2250 V models
  • Source and load mode with seamless switching

BiDC source with load
Details
N9000 | 0,5 mV

N9000 | 0,5 mV

For scalable multi-channel BMS test systems with precise and repeatable cell-voltage emulation.

  • Standard version 0.5 mV
  • Up to 0-6 V, ±5 A & 30 W per channel for cell simulation
  • Modular in 4 U: 36 isolated channels with 0.1 mV precision
  • BMS-HIL tests: SOC, SEQ & fault simulation under 1 ms

Modular system
Details
N69200

N69200

For repeatable load testing of high-power DC components in development, production and ATE.

  • 150 / 600 / 1200 / 1600 / 2400 V available
  • Up to 60 kW & 2500 A, higher outputs on request
  • 0V load operation possible with optional modules

High Power DC Load
Details
test34

ZGX

Bidirectional AC/DC Source

  • Bidirectional AC/DC source & load up to 22.5 kVA
  • AC: up to 450 V L-N, DC: up to 636 V / ±105 A
  • 4-quadrant operation with energy regeneration

AC Source/ Load (1/3ph)
Details
N83524

N83524

For precise BMS, protection circuit and ATE testing of battery electronics and portable devices.

  • Up to 6 V, ± 5 A & 30 W per channel for cell simulation
  • 0.6 mV accuracy & integrated SOC simulation
  • 24 bidirectional channels for active balancing tests

24 Channel Simulator
Details
N83624

N83624

For precise BMS/CMS testing, cell-voltage simulation and high-channel-count test systems in development and production.

  • Up to 15 V, 5 A & 30 W per channel for cell simulation
  • Precision: 0.6 mV voltage & 0.1 µA resolution
  • Optional fault simulation for BMS safety tests

16 Channel Simulator
Details
N75500

N75500

For repeatable grid, disturbance and regenerative testing of grid-connected power electronics.

  • 25 kVA power in a compact 3U chassis
  • Voltage up to 350V L-N and 700V L-L (reverse phase)
  • Full four-quadrant operation for AC and DC simulation

AC Source/ Load (1/3ph)
Details
EAC-S

EAC-S

For repeatable supply, line-disturbance and device testing with a controlled output waveform.

  • Linear single-phase AC source up to 10 kVA
  • Output up to 300 VAC / 425 VDC
  • Ideal for avionics, standard and EMC testing

Linear 1-ph AC Source
Details
ESA

ESA

For application-specific test systems in power electronics, research and industrial validation.

  • 4-quadrant AC source with energy recovery
  • Grid simulation for inverter and OBC tests
  • AC source and electronic load in one device

AC Source/ Load (1/3ph)
Details
KGS

KGS

For realistic grid, converter and avionics testing in high-power test systems.

  • AC/DC power amplifier with 4-quadrant mode
  • High bandwidth for dynamic testing
  • SiC technology for high power density

4Q AC/DC Amplifier
Details
EAC-3S

EAC-3S

Three-Phase Linear AC Source

  • Linear 3-phase AC source up to 30 kVA
  • Output up to 300 VAC / 425 VDC
  • Ideal for avionics, standard and EMC testing

Linear 3-ph AC Source
Details
LAB/SMP

LAB/SMP

Compact 19-inch platform for repeatable supply and simulation tasks.

  • Power output from 750W to 2.4kW
  • Output voltage up to 1200V
  • Single device: Current up to 160 A

Low Power DC Source
Details
N35100

N35100

Bidirectional Low-Voltage DC

  • Bidirectional DC source with energy recovery
  • Up to 7.5 kW & ±300 A in 1U, M/S expandable
  • Source and load mode with seamless switching

BiDC source with load
Details
pvServe

pvServe

PV Service Power Supply

  • Ideal for service, maintenance and PV park analysis
  • String simulation independent of solar radiation
  • Fault diagnosis for modules, strings and inverters

PV service DC Source
Details
AEL-5000

AEL-5000

For reproducible load and protection testing of UPS systems, inverters and power sources.

  • Voltage range up to 480 Vrms and 700 Vdc
  • Power up to 45 kW and current up to 225 A
  • Frequency range DC and 40 Hz up to 440 Hz

AC/DC Load
Details
ASR-3000

ASR-3000

AC/DC Power Source

  • Power from 2 kVA up to 5 kVA
  • Output Votlage up to 400 Vrms & ±570 Vdc
  • Frequency up to 999.9 Hz; HF model up to 5 kHz

AC Source (1/3-ph)
Details
ASR-6000

ASR-6000

AC/DC Power Source

  • Power from 4.5 kVA up to 24 kVA
  • Voltage up to 700 (L-L) / 1000 Vdc
  • Flexible phase modes: 1P2W, 1P3W, and 3P4W selectable

AC Source (1/3-ph)
Details
BSL

BSL

Bidirectional DC system

  • Bidirectional DC power supply with regeneration
  • High power for battery and EV testing
  • Master-slave extension for megawatt systems

DC Source & DC Load
Details
N23010

N23010

For parallel semiconductor reliability testing in environmental chambers and automated test systems.

  • Per isolated channel up to: 15 V / 5 A
  • Voltage range up to 15 V with 0.01% accuracy
  • Current measurement in µA range for leakage current tests

24 Channel DC source
Details
N23020

N23020

16 Channel DC Power Supply

  • 16 independent channels in a compact 19" 2U chassis
  • nA-level current measurement for leakage testing
  • Voltage range 0-6 V with 0.1 mV precision

16 Channel DC source
Details
N2600

N2600

A compact platform for precise I-V characterization and automated component testing.

  • 5-in-1: Source & measure V, I and resistance
  • 4-quadrant operation as source and sink (load)
  • Range up to 1100 V, 10 A (pulse) and 200 MΩ

SMU
Details
N3200

N3200

For breakdown, insulation, leakage-current and material tests requiring low output currents.

  • ±2.5 / ±5 / ±10 kV HV DC power supply
  • 2 / 5 / 10 mA & 20 / 25 W depending on model
  • Ideal for insulation and breakdown tests (IGBT)

High-voltage DC Source
Details
N32100

N32100

For controlled qualification of semiconductors, components and physics research setups.

  • 3 / 4 / 5 / 6 / 8 / 10 kV high-voltage DC source
  • Up to 1 A output current & 2.5 kW depending on model
  • SEQ, Sweep & Low-Voltage Mode integrated

High-voltage DC Source
Details

Lorem Ipsum dolor sit amet

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.

Questions? Contact Us

By phone, email or contact form – we are happy to assist you.

Phone
+49 (0) 6205 - 3948-0
Direct contact for quick questions.
Email
info@et-system.de
Send us your inquiry conveniently by email.
Form
Contact Form
Ideal for technical or project-related inquiries.